Audio cassette

A standard audio cassette

An audio cassette is a type of cassette which can store music and sounds. To play a tape, a cassette player or cassette recorder is used. This is also known as a cassette deck, by analogy with reel-to-reel decks. Cassettes store the sound on a magnetic tape that is wound around the two reels in the cassette. Like vinyl records, most cassettes have two sides, called the A-side and B-side. The listener flips the cassette over to play or record on the other side. Some players have auto-reverse, meaning they can play both sides on their own. Cassettes have a tab in the upper left corner that can be removed to prevent accidentally recording over the tape. Cassettes typically hold anywhere from a few minutes up to an hour of audio per side. The longer the tape, the thinner it must be. Tapes longer than 60 minutes (30 minutes per side), and especially those longer than 90 minutes (45 minutes per side), tend to be fragile and more likely to break or get jammed inside the player.

History

The standard audio cassette was invented in 1962 by Lou Ottens of the Philips company.^[1] They named it the "Compact Cassette". The first cassettes and cassette recorders had poor audio quality. They were used for recording speech rather than music. Over time, audio quality improved, and they became usable for music. During the 1970s, the cassette grew to be a popular physical format for audio. Their popularity grew further during the following decades. The Walkman, released in 1979, made the cassette very popular in the 1980s. In the 1990s, CDs became more popular than cassettes for prerecorded music, however the cassette remained the most popular format for homemade recordings until CD recorders became affordable in the early 2000s.

Use as a data medium

Some early home computers, such as the Commodore 64, used cassettes to store data or computer programs. Some cassettes were marketed specifically for data, although these cassettes were not physically different from those used for audio. Software and games were also sold on cassettes. In the late 1980s, higher-capacity tape formats, floppy disks, and CD-ROMs made this usage of the cassette obsolete. Another format called D/CAS (Data Cassette), sometimes called a streamer cassette, was also available. It was based on the audio cassette, but it had a different formulation of tape that was designed for data only, and used a special tape drive that was incompatible with normal cassettes. It could store up to 600 MB of data. Unlike normal cassettes, it had only one side.

Types of cassette

There are four types of cassettes, each using a different magnetic particle bonded to the plastic tape stock. The tape type alone is not an indicator of the quality of the tape; there are high-quality and poor-quality examples of all four types.

Type I - Ferric - Type I was the original cassette formulation and is made from rust-like ferric oxide particles. These particles give the tape its characteristic brown color. Type I tapes have strong, high-quality bass and midrange, but less treble response than the other types. The vast majority of cassettes on the market are Type I.
Type II - CrO2 and cobalt - Type II tapes are made from chromium dioxide or a mixture of cobalt and ferric oxide particles. The tape is typically black or very dark brown. Type II tapes have good treble response, and acceptable bass response, although the bass is not as strong as Type I.
Type III - Ferrochrome - Type III tapes are a hybrid of Types I and II. They consist of a layer of ferric tape for strong bass, and a layer of chromium dioxide tape for strong treble. Type III tapes are no longer made and were never very popular because the ideal bias settings for CrO2 and ferric tape are different, so the person recording the tape is forced to choose a bias setting that is not ideal. Many tape recorders do not have a setting for them. On decks without a Type III setting, they should be recorded as a Type I.
Type IV - Metal - Type IV tapes are made from metal particles rather than metal oxides. The tape is typically a shiny metallic black color. They have good treble and bass response and very high dynamic range. Type IV tapes are no longer made.

Hybrid formats also exist, for example cobalt tapes meant to be recorded as a Type I or metal particle tapes meant to be recorded as a Type II.

Decline in popularity

As compact discs grew in popularity, cassettes were used less. In 2011, the Oxford English Dictionary attempted to remove the word "cassette tape" from a small version of its book.^[2] Cassettes are still popular with some audiophiles, as it is an analog format that is portable and more convenient than vinyl.

Successors

Several media formats have been developed to replace the cassette. Among these are the Elcaset, stereo microcassette, Digital Audio Tape, Digital Compact Cassette, MiniDisc, and CD-R. With the exception of CD-R, none of these formats ever surpassed the popularity of the cassette.

Audio Cassette Media

The Sony Walkman TPS-L2
Cassettes at a Cairo Kiosk (2015)
Burmese music cassette tapes for sale, Yangon, Myanmar (2006)
Visualization of the magnetic field on a stereo cassette containing a 1kHz audio tone.
Maxell compact cassettes, C60 (90m) and C90 (135m)
Tape Guide via Security Mechanism (SM)
Tapematic 2002 audio cassette loaders, used to wind ("load") magnetic tape from tape reels ("pancakes") in the machine into empty cassette tape shells (known as C-0s or C-Zeros). The C-0s have just leader which is cut into two and the tape is attached to the leader, then wound.
Nakamichi RX-505 cassette deck. It has an auto reverse feature that rotates the cassette, hence the bump in the middle.
Radio–cassette players of the design also called "ghetto-blasters" and "boomboxes".Note the upper-left which has a built in CRT television for receiving television broadcasts