Point-blank range

The ladder sight on an M1917 Enfield rifle. When the bar on the rear sight is raised, the barrel of the rifle points slightly upwards compared to the sights. This compensates for bullet drop over a given range.

Point-blank range is any distance where a certain firearm can hit a target without the need to adjust for bullet drop. When a bullet leaves a firearm, it is pulled downwards by gravity. When shooting at a distant target, the shooter must point the firearm above the target to adjust for this. If the target is close enough to the shooter, the distance the bullet drops will be very small. In this case, the shooter can aim the gun straight at the target.

The sights of a gun are set so that the barrel has a small upward tilt. When the bullet leaves the gun, it starts by rising and later drops. This means that weapon hits too low for very close targets, too high for mid-range targets, too low for very far targets. It hits point blank at the two distances when it crosses between too low and too high. For a .270 Winchester, as an example, the bullet first crosses the line of sight at about 23m (25 yds) as it is rising and again at about 250m (275 yds). With this gun, point blank range for a deer size target is about 275m (300-310 yards).

Point-blank range is different for each weapon. The flatter the bullet's trajectory or the larger the target, the longer the point-blank range will be.[1]

In popular usage, point-blank range has come to mean very close range but not close enough to be a contact shot.[1]

Point-blank Range Media

References

  1. 1.0 1.1 "Definition for "point blank range"". MidwayUSA. Archived from the original on 8 December 2007. Retrieved 11 September 2007.