Wire rope

(Redirected from Wire cable)
Steel wire rope (right hand lay)
Wire rope construction
This image of a fraying wire rope shows some individual wires.
RHOL wire rope terminated in a loop with a thimble and ferrule

Wire rope consists of several strands laid (or 'twisted') together like a helix. Each strand is likewise made of metal wires laid together like a helix. Initially wrought iron wires were used, but today steel is the main material used for wire ropes.

History & materials

Modern wire rope was invented by the German mining engineer Wilhelm Albert in the years between 1831 and 1834 for use in mining in the Harz Mountains in Clausthal, Lower Saxony, Germany. It was quickly accepted because it was better than ropes made of hemp or to metal chains, such as had been used before.

Wilhelm Albert's first ropes consisted of wires twisted about a hemp rope core, six such strands then being twisted around another hemp rope core in alternating directions for extra stability. Earlier forms of wire rope had been made by covering a bundle of wires with hemp.

In America wire rope was later manufactured by John A. Roebling, forming the basis for his success in suspension bridge building. Roebling introduced a number of innovations in the design, materials and manufacture of wire rope.

Manufacturing a wire rope is similar to making one from natural fibres. The individual wires are first twisted into a strand, then six or so such strands again twisted around a core. This core may consist of steel, but also of natural fibres such as sisal, manila, henequen, jute, or hemp. This is used to cushion off stress forces when bending the rope.

Construction & specification

The specification of a wire rope type, including the number of wires per strand, the number of strands, and the lay of the rope, are is documented using a commonly accepted coding system, with abbreviations. For example, the rope shown in the figure "Wire rope construction" is designated:

6x19 FC RH OL FSWR

6 Number of strands that make up the rope
19 Number of wires that make up each strand
FC Fibre core
RH Right hand lay
OL Ordinary lay
FSWR Flexible steel wire rope

Each of the sections of the wire rope designation described above is variable. There are therefore a large number of combinations of wire rope that can be specified in this manner. The following abbreviations are commonly used to specify a wire rope.

Abbr. Description
FC Fibre core
FSWR Flexible steel wire rope
FW Filler wire
IWR Independent wire rope
IWRC Independent wire rope core
J Jute (fibre)
LH Left hand lay
LL Lang's lay
NR Non-rotating
OL Ordinary lay
RH Right hand lay
S Seale
SF Seale filler wire
SW Seale Warrington
SWL Safe working load
TS Triangular strand
W Warrington
WF Warriflex
WLL Working load limit
WS Warrington Seale

Wire Rope Media

Other websites