RLC circuit
A circuit containing resistance (R), inductance (L), and capacitance (C) is called an RLC circuit. A simple circuit only has one RLC series.
With a resistance R present, the total electromagnetic energy U of the circuit (the sum of the electric energy and magnetic energy) is no longer constant. Instead, it decreases with time as energy is transferred to thermal energy in the resistance. Because of this loss of energy, the oscillations of charge, current and potential difference continuously decrease in amplitude, and the oscillations are said to be damped.
They are damped in exactly the same way as those of the damped block-spring oscillator. To analyze the oscillations of this circuit, an equation can be written for the total electromagnetic energy [math]\displaystyle{ U }[/math] in the circuit at any instant. This is because the resistance does not store electromagnetic energy.
- [math]\displaystyle{ U = U_B + U_E = \frac{Li^2}{2} + \frac{q^2}{2C} }[/math] (Eq. 1)
However, this total energy decreases as energy is transferred to thermal energy.
- [math]\displaystyle{ \frac{dU}{dt} = -{i^2}R }[/math] (Eq. 2)
where the minus sign indicates that [math]\displaystyle{ U }[/math] decreases. By differentiating Eq. 1 with respect to time and then substituting the result in Eq. 2, the following is obtained:
- [math]\displaystyle{ \frac{dU}{dt} = {Li}\frac{di}{dt} + \frac{q}{c}\frac{dq}{dt} = -{i^2}{R} }[/math]
Substituting [math]\displaystyle{ dq/dt }[/math] for [math]\displaystyle{ i }[/math] and [math]\displaystyle{ d^2/dt^2 }[/math] for [math]\displaystyle{ di/dt }[/math], the following is obtained:
- [math]\displaystyle{ {L}\frac{d^2q}{dt^2} + {R}\frac{dq}{dt} + \frac{q}{C} = 0 }[/math]' (RLC circuit)
RLC Circuit Media
Tuned circuit of a shortwave radio transmitter. This circuit does not have a resistor like the above, but all tuned circuits have some resistance, causing them to function as an RLC circuit.
Figure 1: RLC series circuit*Template:Unbulleted list*
Bode magnitude plot for the voltages across the elements of an RLC series circuit. Natural frequency ω0 = 1 rad/s, damping ratio ζ = 0.4.
Figure 2. RLC parallel circuit*V – the voltage source powering the circuit*I – the current admitted through the circuit*R – the equivalent resistance of the combined source, load, and components*L – the inductance of the inductor component*C – the capacitance of the capacitor component
