Abutment
In engineering, abutment refers to the substructure at the ends of a bridge span or dam.[1] This is where the structure's superstructure rests or contacts.[1] Single-span bridges have abutments at each end. These provide vertical and lateral (side to side) support for the bridge. They also act as retaining walls to resist lateral movement of the earthen fill of the bridge approach. Multi-span bridges require piers to support ends of spans that are not supported by abutments.[2] Dam abutments are generally the natural valley walls. They may also be artificial in order to support arch dams such as Kurobe Dam in Japan.[1][3]
The term may also refer to the structure supporting one side of an arch,[4] or masonry used to resist the lateral forces of a vault.[5] The word derives from the verb "abut", meaning to "touch by means of a mutual border".
Abutment Media
Abutment for a large steel arch bridge
Brick abutment supporting disused tramway over the Yass River in Yass, New South Wales
References
- ↑ 1.0 1.1 1.2 "Glossary - "Abutment"". U.S. Bureu of Reclamation. Archived from the original on 25 December 2007. Retrieved 24 January 2015.
- ↑ Abbett, Robert W. (1957). American Civil Engineering Practice. Vol. III. New York: John Wiley & Sons. pp. 26-22&26-32.
- ↑ "関西電力 黒部川第四発電所 (Kurobe Kansaidenryoku Fourth plant)" (in 日本語). Suiryoku.com. Retrieved 24 January 2015.
- ↑ Beall, Christine (1987). Masonry Design and Detailing for Architects, Engineers and Builders. McGraw-Hill. p. 449. ISBN 0-07-004223-3.
- ↑ Pevsner, N. (1970) Cornwall; 2nd ed. Harmondsworth: Penguin; p. 245
