Parallel ATA
_connector_on_a_motherboard_-_34_and_40_pin-_fs_PNr%C2%B00267.jpg)
Parallel ATA is a way to connect storage devices, such as Hard disks, solid-state drives, and CD-ROM drives inside personal computers. The standard is maintained by X3/INCITS committee T13.
It used to be called Advanced Technology Attachment with Packet Interface (ATA/ATAPI). ATA/ATAPI is the result of a long history of development. It is an evolution of the AT Attachment Interface, which was itself evolved in several stages from Western Digital's original Integrated Drive Electronics interface. As a result, many near-synonyms for ATA/ATAPI and its previous incarnations exist, including abbreviations such as IDE which are still in common informal use. With the market introduction of Serial ATA in 2003, the original ATA was retroactively renamed Parallel ATA (PATA).
Parallel ATA standards allow cable lengths up to only 18 inches (46 centimeters). Because of this length limit the technology normally appears as an internal computer storage interface. For many years ATA provided the most common and the least expensive interface for this application. As of 2007, it has largely been replaced by Serial ATA (SATA) in new systems. Older computers based on Parallel ATA are still widely-used in embedded and industrial applications.
Parallel ATA Media
a parallel-ata cable for connecting devices to the motherboard of a computer
IDE Connectors in PCChips M925LR Pentium 4
A drawing of Advanced Technology Attachment (ATA) plug with some pin numbers shown. Vectorization of public-domain original by T4bits.
Compact flash is a miniature ATA interface, slightly modified to be able to also supply power to the CF device.
