Template:Infobox airport

{{{name}}} {{{nativename}}} {{{nativename-a}}} {{{nativename-r}}}
[[Image:{{{image}}}|220px]]
{{{caption}}}
IATA: {{{IATA}}} – ICAO: {{{ICAO}}}
Summary
Elevation AMSL		ft /  m
Coordinates		{{{coordinates}}}
Runways
Direction	Length		Surface
	ft	m
{{{r1-number}}}	{{{r1-length-f}}}	{{{r1-length-m }}}	{{{r1-surface}}}
{{{r2-number}}}	{{{r2-length-f}}}	{{{r2-length-m }}}	{{{r2-surface}}}
Helipads
Number	Length		Surface
	ft	m
{{{h1-number}}}	{{{h1-length-f}}}	{{{h1-length-m }}}	{{{h1-surface}}}
{{{h2-number}}}	{{{h2-length-f}}}	{{{h2-length-m }}}	{{{h2-surface}}}
Statistics ({{{stat-year}}})
{{{stat1-header}}}			{{{stat1-data}}}
{{{stat2-header}}}			{{{stat2-data}}}
{{{footnotes}}}

Template documentation[view] [edit] [history] [purge]

Usage

The following blank template includes all of the available parameter names, except for repeating names used for runways and statistics. All parameters except name are optional, however "IATA: none – ICAO: none" along with the heading "Summary" will always appear. Any unused parameters should be omitted, but can also be left blank if preferred. The use of flag icons with this infobox are discouraged.

{{Infobox airport | name = | nativename = | nativename-a = | nativename-r = | image = | image-width = <!-- if less than 200 --> | caption = | image2 = | image2-width = <!-- if less than 200 --> | caption2 = | IATA = | ICAO = | FAA = | TC = | LID = | GPS = | WMO = | type = | owner-oper = | owner = | operator = | city-served = | location = | hub = | built = <!-- military airports --> | used = <!-- military airports --> | commander = <!-- military airports --> | occupants = <!-- military airports --> | metric-elev = | elevation-f = | elevation-m = | coordinates = | latd = | latm = | lats = | latNS = | longd= | longm= | longs= | longEW= | coordinates_type = | coordinates_region = | coordinates_notitle = | website = | image_map = | image_mapsize = | image_map_alt = | image_map_caption = | pushpin_map = | pushpin_label_position = | pushpin_label = | pushpin_map_alt = | pushpin_mapsize = | pushpin_image = | pushpin_map_caption = | r1-number = | r1-length-f = | r1-length-m = | r1-surface = <!-- up to r8 --> | metric-rwy = | h1-number = | h1-length-f = | h1-length-m = | h1-surface = <!-- up to h12 --> | stat1-header = | stat1-data = <!-- up to stat4 --> | stat-year = | footnotes = }}

Parameters

All parameters except name are optional.

Airport name

These parameters specify the airport name which is displayed at the top of the infobox.

name

The name of the airport in English, such as Warsaw Chopin Airport or Beijing Capital International Airport.

nativename

Airport name in a native language using Western characters (French, German, Spanish, etc.), such as Lotnisko Chopina w Warszawie. In such cases the native name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms. Can also be used for two different names in the same language (see Region of Waterloo International Airport).

nativename-a

Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as 北京首都国际机场.

nativename-r

Use in conjunction with above for Romanized name of the airport, such as Běijīng Shǒudū Guójì Jīcháng. In such cases the Romanized name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms.

Airport image

These parameters specify an airport photograph or logo which is displayed below the title. A second image can also be displayed below the first image by using the parameter names ending with a "2".

image / image2

The name of image file, i.e. airport.png or logo.gif, etc.

image-width / image-width2

The image width in pixels, i.e. 175 (defaults to 200 if not specified). This parameter should only be used for small images that appear distorted when expanded to a width of 200 pixels.

caption / caption2

Text displayed beneath the image. This should only be used for photographs that require an explanation; it should be omitted for aerial photographs or airport logos.

Airport codes

These parameters specify airport location identifiers which are displayed below the image (or below title if there is no image):

IATA

The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none.

ICAO

The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none.

FAA

The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed.

TC

The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed.

LID

A location identifier for airports outside the US or Canada, if different than ICAO or IATA codes. If omitted or left blank, nothing is displayed.

GPS

A Global Positioning System code for the airport, if different than ICAO or IATA codes. If omitted or left blank, nothing is displayed.

WMO

The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed.

Airport summary

These parameters specify airport details for the "Summary" section displayed below the airport codes.

type

Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.

owner-oper

If the airport is owned and operated by the same entity, use this in place of owner and operator.

owner

Name of the airport owner.

operator

Name of the airport operator, if different than the owner.

city-served

If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.

Example: city-served = [[Paris]]

Result: Paris

location

Name of the town or city where the airport is located. This is not automatically linked, in order to allow multiple links if needed.

Example: location = [[Orly]], [[France]]

Result: Orly, France

hub

If the airport serves as an hub list the airlines here. This is not automatically linked, in order to allow multiple links if needed.

Example: *[[British Airways]] *[[BMI (airline)|BMI]] *[[Virgin Atlantic Airways]]

Result:

• British Airways
• BMI
• Virgin Atlantic Airways

elevation-f

Height above mean sea level, in feet.

elevation-m

Height above mean sea level, in metres.

website

External link to the airport's official website. See Wikipedia: External links#How to link for more information.

Example: website = [http://www.dfwairport.com/ www.dfwairport.com]

Result: www.dfwairport.com

Geographic coordinates

This template allows for the insertion of geographic coordinates in two different ways: you can either provide a complete {{Coord}} template in the coordinates parameter, or you can provide the individual coordinate components (degrees, minutes, seconds, etc.) in the separate parameters described below. The latter method also allows you to insert a pushpin map with an automatically-placed airport icon and label (see below).

If you use both methods, then the coordinates parameter will be used in the infobox.

coordinates

Latitude and Longitude of airport, specified using the {{Coord}} template. When entering the coordinates always ensure that the resultant map or image shows the airport. It is very easy to confuse "N" for "S" or "E" for "W". If used as shown below, this will also cause the airport to appear in Google Earth's Geographic Web Layer.

Example: coordinates = {{Coord|49|27|16|N|002|06|46|E|type:airport_region:FR|display=inline,title}}

Result: 49°27′16″N 002°06′46″E

latd

Latitude degrees. Can also be used for decimal degrees.

latm

Latitude minutes. Omit or leave blank if latd has a decimal value.

lats

Latitude seconds. Omit or leave blank if latd has a decimal value.

latNS

Latitude North or South (enter N or S). Omit or leave blank if latd has a decimal value.

longd

Longitude degrees. Can also be used for decimal degrees.

longm

Longitude minutes. Omit or leave blank if longd has a decimal value.

longs

Longitude seconds. Omit or leave blank if longd has a decimal value.

longEW

Longitude East or West (enter E or W). Omit or leave blank if longd has a decimal value.

coordinates_type

Set the type parameter for the coordinates. If this parameter is omitted or left blank, the type will be set to airport. It is unlikely that you would need to change this.

coordinates_region

Set the region parameter for the coordinates. Use either a two character ISO 3166-1 alpha-2 country code or an ISO 3166-2 region code. For example, the United Kingdom is GB, and Ontario, Canada is CA-ON.

coordinates_notitle

By default the coordinates will be displayed both in the infobox and in the title of the article. If this parameter is set to a non-empty value, the coordinates will be displayed only in the infobox.

Military airports

These optional parameters provide additional information for military airports. The parameter names are based on those used in Template:Infobox Military Structure. This allows the display of information from that template, without the need to include an additional infobox. For an example, see Davis-Monthan Air Force Base.

built

The date when the structure was built, usually given in years.

used

The period during which the structure was in active military use, usually given in years.

commander

The current commanding officer, for structures currently in military use.

occupants

Any notable military units which occupy the structure.

Maps

This template provides two ways to include a map: as a simple image, or using {{Location map}} and the coordinate parameters described above to automatically place a pushpin coordinate marker and label on a map.

image_map

The name of an image to use as a map. Do not include the "File:" prefix.

image_mapsize

The width to display the image map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.

image_map_alt

Alt text for the image map.

image_map_caption

Caption to display below the image map.

pushpin_map

The name of a location map as per Template:Location map (eg. Indonesia or Russia). The coordinate fields (eg. latd and longd) position a pushpin coordinate marker and label on the map automatically.

pushpin_label_position

The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are left, right, top, bottom, and none.

pushpin_label

The label to place next to the pushpin coordinate marker. Defaults to the value of the name parameter.

pushpin_mapsize

The width to display the pushpin map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.

pushpin_map_alt

Alt text for the pushpin map.

pushpin_image

Alternative map image; see Template:Location map#Using Alternative Map for details.

pushpin_map_caption

Caption to display below the pushpin map.

Infobox control

These parameters control how certain fields within the infobox are displayed.

metric-elev

Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. This can be seen in example 1.

metric-rwy

Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. Examples 1 and 2 below show the runway length with metres first; example 3 and 4 show it with feet before metres.

Runways

These parameters specify details for each runway in the "Runways" section displayed below the summary. This can also be used to specify water landing areas for seaplanes (see Fairbanks International Airport). Parameters start with r1- for the first runway, r2- for the second runway, up to r8- for the eighth runway (if more are needed, leave a message on the talk page). Each airport should have at least one runway.

r_n-number (r1-number, r2-number, ...)

The designation of the runway, normally two numbers like this → 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.

r_n-length-f (r1-length-f, r2-length-f, ...)

Runway length in feet.

r_n-length-m (r1-length-m, r2-length-m, ...)

Runway length in metres.

r_n-surface (r1-surface, r2-surface, ...)

Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type "Paved" if possible.

Helipads

These parameters specify details for each helipad in the "Helipads" section displayed below the runways. Parameters start with h1- for the first helipad, h2- for the second helipad, up to h12- for the twelfth helipad (if more are needed, leave a message on the talk page). This section is optional and only appears if the h1- parameters are specified. See example 1 and example 3 below.

h_n-number(h1-number, h2-number, ...)

The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.

h_n-length-f (h1-length-f, h2-length-f, ...)

Helipad length in feet.

h_n-length-m (h1-length-m, h2-length-m, ...)

Helipad length in metres.

h_n-surface (h1-surface, h2-surface, ...)

Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.

Statistics

These parameters specify details for an optional "Statistics" section displayed below the runways and helipads. Parameters start with stat1- for the first statistic, stat2- for the second statistic, etc. This section only appears if the stat1- parameters are specified. See example 1 and example 3 below.

stat_n-header (stat1-header, stat2-header, ...)

A brief description of each statistic, such as Passengers or Aircraft operations.

stat_n-data (stat1-data, stat2-data, ...)

The data associated with the corresponding header.

stat-year

The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.

Footnotes

This parameter contains text for footnotes displayed at the bottom of the infobox.

footnotes

The most common use for this field is to give sources or references for the data displayed in the infobox. See the examples below.

Examples

Example 1

Warsaw Frederic Chopin Airport Port Lotniczy im. Fryderyka Chopina Warszawa/Okęcie Airport
IATA: WAW – ICAO: EPWA
Summary
Airport type		Military/Public
Operator		Polish Airports State Enterprise (PPL)
Serves		Warsaw
Location		Okęcie district of Warsaw
Hub for		LOT Polish Airlines, Wizz Air
Elevation AMSL		110 m / 362 ft
Coordinates		52°09′57″N 020°58′02″E
Website		www.lotnisko-chopina.pl
Map
Location in Poland
Runways
Direction	Length		Surface
	ft	m
11/29	9,186	2,800	Asphalt
15/33	12,106	3,689	Asphalt
Helipads
Number	Length		Surface
	ft	m
H1	131	40	Concrete
Statistics (2008)
Passengers			11,736,958
Movements			159,718
Statistics: Civil Aviation Office Sources: Polish AIP at EUROCONTROL

Warsaw Frederic Chopin Airport

This example shows the appearance of the infobox without an image.

Note: helipad information added to illustrate function of metric-rwy parameter.

{{Infobox airport
| name         = Warsaw Frederic Chopin Airport
| nativename   = ''Port Lotniczy im. Fryderyka Chopina''
| nativename-r = Warszawa/Okęcie Airport
| image        = <!--leave blank, this is demo without image-->
| IATA         = WAW
| ICAO         = EPWA
| type         = Military/Public
| operator     = Polish Airports State Enterprise (PPL)
| city-served  = [[Warsaw]]
| location     = [[Okęcie]] district of [[Warsaw]]
| hub          = [[LOT Polish Airlines]], [[Wizz Air]]
| metric-elev  = yes
| elevation-m  = 110
| elevation-f  = 362
| latd = 52 | latm = 09 | lats = 57 | latNS = N
| longd= 020 | longm= 58 | longs= 02 | longEW= E
| coordinates_region     = PL-MX
| website      = [http://www.lotnisko-chopina.pl/?lang=en www.lotnisko-chopina.pl]
| pushpin_map            = Poland
| pushpin_label          = WAW
| pushpin_map_caption    = Location in Poland
| metric-elev  = yes
| r1-number    = 11/29
| r1-length-m  = 2,800
| r1-length-f  = 9,186
| r1-surface   = [[Asphalt]]
| r2-number    = 15/33
| r2-length-f  = 12,106
| r2-length-m  = 3,689
| r2-surface   = Asphalt
| h1-number    = H1
| h1-length-m  = 40
| h1-length-f  = 131
| h1-surface   = [[Concrete]]
| stat-year = 2008
| stat1-header = Passengers
| stat1-data = 11,736,958
| stat2-header = Movements
| stat2-data = 159,718
| stat
| footnotes    = Statistics: Civil Aviation Office<ref name="stats">[http://www.ulc.gov.pl/_download/regulacja_rynku/statystyki/liczba_obsl_pasazerow_przesylek_20042007_150208.pdf Data from The Civil Aviation Office of Poland (Urząd Lotnictwa Cywilnego)]. {{pl icon}}</ref><br>Sources: Polish [[Aeronautical Information Publication|AIP]] at [[European Organisation for the Safety of Air Navigation|EUROCONTROL]]<ref>[http://www.ead.eurocontrol.int/publicuser/protect/pu/main.jsp EAD Basic]</ref>
}}

Example 2

Beijing Capital International Airport 北京首都国际机场 Běijīng Shǒudū Guójì Jīcháng
Beijing Capital Departure Hall
IATA: PEK – ICAO: ZBAA
Summary
Airport type		Public
Operator		Civil Aviation Administration of China
Serves		Beijing
Location		Chaoyang District, Beijing
Hub for		Air China, China Southern Airlines
Elevation AMSL		116 ft / 35 m
Coordinates		40°04′48″N 116°35′04″E
Website		www.bcia.com.cn
Runways
Direction	Length		Surface
	m	ft
18L/36R	3,800	12,467	Asphalt
18R/36L	3,200	10,499	Asphalt

Beijing Capital International Airport

This example shows the appearance of the infobox with an image and a caption.

It also uses both the nativename-a and nativename-r parameters.

{{Infobox airport
| name         = Beijing Capital International Airport
| nativename-a = 北京首都国际机场
| nativename-r = Běijīng Shǒudū Guójì Jīcháng
| image        = Beijing Capital Departure Hall.jpg
| caption      = Beijing Capital Departure Hall
| IATA         = PEK
| ICAO         = ZBAA
| type         = Public
| operator     = [[Civil Aviation Administration of China]]
| city-served  = [[Beijing]]
| location     = [[Chaoyang District, Beijing]]
| hub          = [[Air China]], [[China Southern Airlines]]
| elevation-f  = 116
| elevation-m  = 35
| coordinates  = {{Coord|40|04|48|N|116|35|04|E|type:airport_region:CN|display=inline,title|name=Beijing Capital International Airport}}
| website      = [http://www.bcia.com.cn/ www.bcia.com.cn]
| metric-rwy   = yes
| r1-number    = 18L/36R
| r1-length-m  = 3,800
| r1-length-f  = 12,467
| r1-surface   = [[Asphalt]]
| r2-number    = 18R/36L
| r2-length-m  = 3,200
| r2-length-f  = 10,499
| r2-surface   = Asphalt
}}

Example 3

Coordinates: 32°53′49″N 097°02′17″W    

Dallas-Fort Worth International Airport
IATA: DFW – ICAO: KDFW – FAA LID: DFW
Summary
Airport type		Public
Owner		City of Dallas City of Fort Worth
Operator		DFW Airport Board
Serves		Dallas/Fort Worth
Hub for		American Airlines, American Eagle Airlines
Elevation AMSL		607 ft / 185 m
Coordinates		32°53′49″N 097°02′17″W
Website		www.dfwairport.com
Map
Location within Texas
Runways
Direction	Length		Surface
	ft	m
13L/31R	9,000	2,743	Concrete
13R/31L	9,301	2,835	Concrete
17C/35C	13,401	4,085	Concrete
17L/35R	8,500	2,591	Concrete
17R/35L	13,401	4,085	Concrete
18L/36R	13,400	4,084	Concrete
18R/36L	13,400	4,084	Concrete
Helipads
Number	Length		Surface
	ft	m
H1	158	48	Concrete
Statistics (2005)
Passengers			59,176,265
Aircraft operations			711,878
Metric tonnes of cargo			741,432
Sources: FAA, airport website.

Dallas-Fort Worth International Airport

{{Infobox airport
| name         = Dallas-Fort Worth International Airport
| image        = Dfw_airport.jpg
| IATA         = DFW
| ICAO         = KDFW
| FAA          = DFW
| type         = Public
| owner        = City of [[Dallas, Texas|Dallas]]
City of [[Fort Worth, Texas|Fort Worth]]
| operator     = DFW Airport Board
| city-served  = [[Dallas/Fort Worth Metroplex|Dallas/Fort Worth]]
| hub          = [[American Airlines]], [[American Eagle Airlines]]
| elevation-f  = 607
| elevation-m  = 185
| latd = 32 | latm = 53 | lats = 49 | latNS = N
| longd= 097 | longm= 02 | longs= 17 | longEW= W
| coordinates_region     = US-TX
| website      = [http://www.dfwairport.com/ www.dfwairport.com]
| pushpin_map            = USA Texas
| pushpin_label          = DFW
| pushpin_map_caption    = Location within Texas
| metric-elev  =
| metric-rwy   =
| r1-number    = 13L/31R
| r1-length-f  = 9,000
| r1-length-m  = 2,743
| r1-surface   = [[Concrete]]
| r2-number    = 13R/31L
| r2-length-f  = 9,301
| r2-length-m  = 2,835
| r2-surface   = Concrete
| r3-number    = 17C/35C
| r3-length-f  = 13,401
| r3-length-m  = 4,085
| r3-surface   = Concrete
| r4-number    = 17L/35R
| r4-length-f  = 8,500
| r4-length-m  = 2,591
| r4-surface   = Concrete
| r5-number    = 17R/35L
| r5-length-f  = 13,401
| r5-length-m  = 4,085
| r5-surface   = Concrete
| r6-number    = 18L/36R
| r6-length-f  = 13,400
| r6-length-m  = 4,084
| r6-surface   = Concrete
| r7-number    = 18R/36L
| r7-length-f  = 13,400
| r7-length-m  = 4,084
| r7-surface   = Concrete
| h1-number    = H1
| h1-length-f  = 158
| h1-length-m  = 48
| h1-surface   = Concrete
| stat-year    = 2005
| stat1-header = Passengers
| stat1-data   = 59,176,265
| stat2-header = Aircraft operations
| stat2-data   = 711,878
| stat3-header = Metric tonnes of cargo
| stat3-data   = 741,432
| footnotes    = Sources: FAA<ref>{{FAA-airport|ID=DFW|use=PU|own=PU|site=23710.6*A}}</ref>, airport website<ref>[http://www.dfwairport.com/ Dallas-Fort Worth International Airport], official web site</ref>.
}}

Example 4

Coordinates: 39°49′34″N 084°02′54″W    

Wright-Patterson Air Force Base Air Force Materiel Command
National Museum of the United States Air Force
IATA: FFO – ICAO: KFFO – FAA LID: FFO
Summary
Airport type		Military: Air Force Base
Operator		United States Air Force
Location		Dayton, Ohio
In use		1948 - present
Commander		Gen. Bruce Carlson - Air Force Materiel Command Brig. Gen. Bruce E. Davis - 445th Airlift Wing Col. Colleen M. Ryan - 88th Air Base Wing and Installation Commander
Elevation AMSL		823 ft / 251 m
Coordinates		39°49′34″N 084°02′54″W
Website		www.wpafb.af.mil
Map
Location within Ohio
Runways
Direction	Length		Surface
	ft	m
5L/23R	12,601	3,841	PEM
5R/23L	7,000	2,134	Asphalt
Sources: FAA, official website.

Wright-Patterson Air Force Base

The infobox shows the use of an image and linked text over the blue background in title area. It also makes use of some of the fields used for military airports.

{{Infobox airport
| name         = Wright-Patterson Air Force Base
[[Image:Air Force Materiel Command.png|100px]]<br/>{{smaller|[[Air Force Materiel Command]]}}
| image        = National Museum of the United States Air Force.jpg
| image-width  = 250
| caption      = [[National Museum of the United States Air Force]]
| IATA         = FFO
| ICAO         = KFFO
| FAA          = FFO
| type         = Military: [[Air Force Base]]
| operator     = [[United States Air Force]]
| location     = [[Dayton, Ohio]]
| built        = <!--1948-->
| used         = 1948 - present
| commander    = <div>
* [[General (United States)|Gen.]] Bruce Carlson - [[Air Force Materiel Command]]
* [[General (United States)|Brig. Gen.]] Bruce E. Davis - [[445th Airlift Wing]]
* [[Colonel (United States)|Col.]] Colleen M. Ryan - [[88th Air Base Wing]] and Installation Commander
</div>
| occupants    =
| elevation-f  = 823
| elevation-m  = 251
| latd = 39 | latm = 49 | lats = 34 | latNS = N
| longd= 084 | longm= 02 | longs= 54 | longEW= W
| coordinates_region     = US-OH
| website      = [http://www.wpafb.af.mil/ www.wpafb.af.mil]
| pushpin_map            = USA Ohio
| pushpin_label          = Wright-Patterson AFB
| pushpin_map_caption    = Location within Ohio
| r1-number    = 5L/23R
| r1-length-f  = 12,601
| r1-length-m  = 3,841
| r1-surface   = [[Porous European Mix|PEM]]
| r2-number    = 5R/23L
| r2-length-f  = 7,000
| r2-length-m  = 2,134
| r2-surface   = [[Asphalt]]
| footnotes    = Sources: FAA<ref>{{FAA-airport|ID=FFO|use=PR|own=MA|site=17827.*A}}</ref>, official website<ref>[http://www.wpafb.af.mil/ Wright-Patterson Air Force Base] (official site)</ref>.
}}

References for examples