Template:Infobox bridge/doc
This is a documentation subpage for Template:Infobox bridge. It contains usage information, categories and other content that is not part of the original template page. |
This template uses Lua: |
Usage
{{{native_name}}} | |
---|---|
Begins | {{{starts}}} |
Ends | {{{ends}}} |
Other name(s) | {{{other_name}}} |
{{{id_type}}} | {{{id}}} |
Characteristics | |
Design | {{{design}}} |
Trough construction | {{{material1}}} |
Pier construction | {{{material2}}} |
Water depth | {{{depth}}} |
Traversable? | {{{traversable}}} |
Towpaths | {{{towpath}}} |
Piers in water | {{{piers_in_water}}} |
Load limit | {{{load}}} |
Clearance above | {{{clearance_above}}} |
No. of lanes | {{{lanes}}} |
Design life | {{{life}}} |
First section length | {{{first_length}}} |
First section diameter | {{{first_diameter}}} |
Second section length | {{{second_length}}} |
Second section diameter | {{{second_diameter}}} |
Third section length | {{{third_length}}} |
Third section diameter | {{{third_diameter}}} |
Capacity | {{{capacity}}} |
Rail characteristics | |
No. of tracks | {{{num_track}}} |
Structure gauge | {{{structure_gauge}}} |
Electrified | {{{electrification}}} |
History | |
Contracted lead designer | {{{contracted_designer}}} |
Successful competition design | {{{winner}}} |
Engineering design by | {{{engineering}}} |
Fabrication by | {{{fabricator}}} |
Built | {{{built}}} |
Construction start | {{{begin}}} |
Construction end | {{{complete}}} |
Rebuilt | {{{rebuilt}}} |
Collapsed | {{{collapsed}}} |
Destroyed | {{{destroyed}}} |
Statistics | |
Daily traffic | {{{traffic}}} |
Location | |
Script error: The function "auto" does not exist. | |
Script error: The function "autocaption" does not exist. | |
References | |
{{{references}}} |
Location | |
---|---|
Script error: The function "auto" does not exist. | |
Script error: The function "autocaption" does not exist. |
Copy and paste the template below:
{{Infobox bridge | name = | native_name = | native_name_lang = | image = | image_upright = | alt = | caption = | coordinates = <!-- {{Coord}} --> | os_grid_reference = | qid = | refs = | carries = | crosses = | locale = | starts = | ends = | official_name = | other_name = | named_for = | owner = | maint = | heritage = | id = | id_type = | website = | preceded = | followed = | design = | material = | material1 = | material2 = | length = | width = | height = | depth = | traversable = | towpath = | mainspan = | number_spans = | piers_in_water = | load = | clearance_above = | clearance_below = | lanes = | life = | first_length = | first_diameter = | second_length = | second_diameter = | third_length = | third_diameter = | capacity = | num_track = | track_gauge = | structure_gauge = | electrification = | architect = | designer = | contracted_designer = | winner = | engineering = | builder = | fabricator = | begin = | complete = | cost = | open = <!-- or | opening = --> | inaugurated = | rebuilt = | collapsed = | closed = | replaces = | replaced_by = | traffic = | toll = | extra = <!-- extra = module = embed = --> }}
Parameters
- name
- Name of bridge
- native_name
- Name of the bridge in the local language, if different
- native_name_lang
- ISO code for the local language (e.g. "fr" for French). If more than one, enter the native names using {{Lang}} instead.
- image
- Filename of image of the bridge
- image_upright
- Scaling value, where the default size is 1
- alt
- Alt text for bridge image (see WP:ALT)
- caption
- Text for caption beneath image
- coordinates
- Latitude and longitude. Use {{Coord}}. A typical four-lane bridge (25 m or 82.02 ft wide) requires 0.1 second or 0.0001° of precision.
- os_grid_reference
- OS grid reference
- carries
- Type of vehicles bridge carries
- crosses
- Body of water or geographic feature that is being crossed
- locale
- General area where located (e.g. San Francisco, Indiana-Kentucky State Line)
- starts
- Where the aqueduct starts
- ends
- Where the aqueduct ends
- official_name
- Official name
- other_name
- Also known as name
- named_for
- namesake
- owner
- Persons or body that owns the bridge
- maint
- Maintaining entity (e.g. California Department of Transportation)
- heritage
- Heritage status (e.g. UK listed building)
- id
- ID number, if available
- id_type
- Label for the ID field. The default, if this parameter is not specified, is ID number (for the United States National Bridge Inventory)
- website
- URL to the bridge's website; enclose within {{URL}}
- preceded
- Name of bridge upstream
- followed
- Name of bridge downstream
- design
- Type of bridge (cantilever, truss, suspension)
- material
- Construction material (concrete, steel, iron, stone, brick, wood)
- material1
- Construction material for trough
- material2
- Construction material for piers
- length
- Length of bridge, w/ conversions
- width
- Width of bridge, w/ conversions
- height
- Height of bridge, w/ conversions
- depth
- Depth of aqueduct channel, w/ conversions
- diameter
- (if it's pipe)
- first_length
- length of first section, if segmented
- first_diameter
- diameter of first section, if segmented
- second_length
- length of second section, if segmented
- second_diameter
- diameter of second section, if segmented
- third_length
- length of third section, if segmented
- third_diameter
- diameter of third section, if segmented
- capacity
- rate-of-flow
- traversable
- Can standard craft (for that navigation) pass on the aqueduct? Yes/No
- towpath
- Side of towpath (None, N, S, E, W, NE, NW, SE, SW, Both)
- mainspan
- Length of main span, w/ conversions
- number_spans
- Number of spans or arches
- piers_in_water
- Number of piers standing in a river or other water in normal conditions
- load
- Load limit of the bridge, w/ conversions
- clearance_above
- Clearance from the bridge deck to any part of the structure across the deck, if low enough to be problematic. Some bridges are clear above the deck.
- clearance_below
- Clearance beneath the bridge
- life
- Design life of the bridge in years
- architect
- Those responsible for the conceptual design of the bridge – to be used when engineering/construction design was done by another party
- designer
- Bridge designer/architect (e.g. Isambard Kingdom Brunel)
- contracted_designer
- The lead designer at the contract/post competition phase
- winner
- The winner/s of the design competition phase
- engineering
- The person or organization that did the engineering/construction design, where that differs from 'designer' above
- builder
- Construction company or bridge builder
- fabricator
- Steel fabricator
- begin
- Construction start date
- complete
- Construction end date
- cost
- Total project cost
- open
- Opening date, use {{Start date}}; If the bridge has yet not opened, use
|opening=
- inaugurated
- the date the bridge is ceremonially opened
- rebuilt
- Date of major rebuild
- collapsed
- If collapsed, then date of collapse, don't use
closed
– closure is assumed - closed
- Closing date
- replaces
- The bridge or ferry services that this bridge made redundant
- replaced_by
- The bridge or structure that replaced this bridge
- traffic
- Average Daily Traffic value
- toll
- Price of the toll (if a toll bridge)
- extra
- Spare field for modules, e.g. {{Infobox designation list}}
Coordinates
Use the coordinates=
parameter with {{Coord}} to specify latitude and longitude. See the documentation for the Coord template for details on usage.
If there is no location map or map image specified, then a dynamic map will be displayed in its place if the article's Wikidata item or the Wikidata item indicated in |qid=
has a Script error: The function "label" does not exist. (P625).
Map
Template:Infobox mapframe/doc/parameters
Example
Characteristics | |
---|---|
Design | Through arch bridge |
History | |
Construction start | 28 July 1923 |
Construction end | 19 January 1932 |
Location | |
Script error: The function "auto" does not exist. | |
Script error: The function "autocaption" does not exist. |
{{Infobox bridge | name = Sydney Harbour Bridge | image = Sydney Harbour Bridge from Circular Quay.jpg | carries = Trains, Motor vehicles, pedestrians and bicycles | crosses = [[Port Jackson]] | locale = [[Sydney]], [[New South Wales]], Australia | design = [[Through arch bridge]] | length = {{Convert|1149|m|ft|0|abbr=on}} | width = {{Convert|49|m|ft|0|abbr=on}} | height = {{Convert|134|m|ft|0|abbr=on}} | mainspan = {{Convert|503|m|ft|0|abbr=on}} | above = (?) | below = {{Convert|49|m|ft|0|abbr=on}} at mid-span | begin = 28 July 1923 | complete = 19 January 1932 | open = {{Start-date|19 March 1932}} | coordinates = {{coord|33|51|8|S|151|12|38|E|region:AU-NSW_type:landmark|display = inline}} }}
Microformat
The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name=
parameter. A typical four-lane bridge (25 m or 82.02 ft wide) requires 0.1 second or 0.0001° of precision.
Tracking categories
- Category:Pages using infobox bridge with unknown parameters (0)
- Category:Pages using infobox bridge with clearance (8)
- Category:Pages using infobox bridge with extra (0)
Extended content
|
---|
TemplateData
|
TemplateData for Infobox bridge
<templatedata> { "params": { "child": {}, "embed": {}, "name": {}, "bridge_name": {}, "aqueduct_name": {}, "native_name": {}, "native_name_lang": {}, "image": {}, "image_size": {}, "image_upright": {}, "alt": {}, "caption": {}, "image_caption": {}, "coordinates": {}, "os_grid_reference": {}, "carries": {}, "crosses": {}, "locale": {}, "location": {}, "official_name": {}, "other_name": {}, "also_known_as": {}, "named_for": {}, "owner": {}, "maint": {}, "maintained": {}, "heritage": {}, "id_type": {}, "id": {}, "website": {}, "preceded": {}, "upstream": {}, "followed": {}, "downstream": {}, "design": {}, "material": {}, "material1": {}, "material2": {}, "length": {}, "width": {}, "height": {}, "depth": {}, "traversable": {}, "passable": {}, "towpath": {}, "mainspan": {}, "number_spans": {}, "spans": {}, "piers_in_water": {}, "pierswater": {}, "load": {}, "clearance_above": {}, "clearance": {}, "clearance_below": {}, "below": {}, "lanes": {}, "life": {}, "num_track": {}, "notrack": {}, "track_gauge": {}, "gauge": {}, "structure_gauge": {}, "electrification": {}, "architect": {}, "designer": {}, "winner": {}, "contracted_designer": {}, "engineering": {}, "builder": {}, "fabricator": {}, "begin": {}, "complete": {}, "cost": {}, "open": {}, "inaugurated": {}, "rebuilt": {}, "collapsed": {}, "closed": {}, "replaces": {}, "replaced_by": {}, "dedicated": {}, "opening": {}, "opened": {}, "traffic": {}, "toll": {}, "extra": {}, "references": {}, "qid": {}, "refs": {}, "built": {}, "destroyed": {}, "mapframe": { "label": "Show mapframe map", "description": "Specify yes or no to show or hide the map, overriding the default", "example": "yes", "type": "string", "default": "no", "suggested": true }, "mapframe-caption": { "label": "Mapframe caption", "description": "Caption for the map. If mapframe-geomask is set, then the default is \"Location in <<geomask's label>>\"", "type": "string" }, "mapframe-custom": { "label": "Custom mapframe", "description": "Use a custom map instead of the automatic mapframe. Specify either a template, or another template that generates a mapframe map, or an image name. If used, other mapframe parameters will be ignored.", "type": "wiki-template-name" }, "mapframe-id": { "aliases": [ "id", "qid" ], "label": "Mapframe Wikidata item", "description": "Id (Q-number) of Wikidata item to use.", "type": "string", "default": "(item for current page)" }, "mapframe-wikidata": { "label": "Mapframe shapes from Wikidata", "description": "et to yes to show shape/line features from the wikidata item, if any, when coordinates are specified by parameter", "example": "yes", "type": "string" }, "mapframe-point": { "label": "Mapframe point feature", "description": "Override display of mapframe point feature. Turn off display of point feature by setting to \"none\". Force point marker to be displayed by setting to \"on\"", "type": "string" }, "mapframe-shape": { "label": "Mapframe shape feature", "description": "Override display of mapframe shape feature. Turn off by setting to \"none\". Use an inverse shape (geomask) instead of a regular shape by setting to \"inverse\"", "type": "string" }, "mapframe-frame-width": { "aliases": [ "mapframe-width" ], "label": "Mapframe width", "description": "Frame width in pixels", "type": "number", "default": "270" }, "mapframe-frame-height": { "aliases": [ "mapframe-height" ], "label": "Mapframe height", "description": "Frame height in pixels", "type": "number", "default": "200" }, "mapframe-shape-fill": { "label": "Mapframe shape fill", "description": "Color used to fill shape features", "type": "string", "default": "#606060" }, "mapframe-shape-fill-opacity": { "label": "Mapframe shape fill opacity", "description": "Opacity level of shape fill, a number between 0 and 1", "type": "number", "default": "0.5" }, "mapframe-stroke-color": { "aliases": [ "mapframe-stroke-colour" ], "label": "Mapframe stroke color", "description": "Color of line features, and outlines of shape features", "type": "string", "default": "#ff0000" }, "mapframe-stroke-width": { "label": "Mapframe stroke width", "description": "Width of line features, and outlines of shape features", "type": "number", "default": "5" }, "mapframe-marker": { "label": "Mapframe marker", "description": "Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options", "example": "museum", "type": "string" }, "mapframe-marker-color": { "aliases": [ "mapframe-marker-colour" ], "label": "Mapframe marker color", "description": "Background color for the marker", "type": "string", "default": "#5E74F3" }, "mapframe-geomask": { "label": "Mapframe geomask", "description": "Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country, or P131 for located in the administrative territorial entity)", "example": "Q100", "type": "wiki-page-name" }, "mapframe-geomask-stroke-color": { "aliases": [ "mapframe-geomask-stroke-colour" ], "label": "Mapframe geomask stroke color", "description": "Color of outline of geomask shape", "type": "string", "default": "#555555" }, "mapframe-geomask-stroke-width": { "label": "Mapframe geomask stroke width", "description": "Width of outline of geomask shape", "type": "number", "default": "2" }, "mapframe-geomask-fill": { "label": "Mapframe geomask fill", "description": "Color used to fill outside geomask features", "type": "string", "default": "#606060" }, "mapframe-geomask-fill-opacity": { "label": "Mapframe geomask fill opacity", "description": "Opacity level of fill outside geomask features, a number between 0 and 1", "type": "number", "default": "0.5" }, "mapframe-zoom": { "label": "Mapframe zoom", "description": "Set the zoom level, from \"1\" to \"18\", to used if the zoom level cannot be determined automatically from object length or area", "example": "12", "type": "number", "default": "10" }, "mapframe-length_km": { "label": "Mapframe length (km)", "description": "Object length in kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-length_mi": { "label": "Mapframe length (mi)", "description": "Object length in miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-area_km2": { "label": "Mapframe area (km^2)", "description": "Object arean square kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-area_mi2": { "label": "Mapframe area (mi^2)", "description": "Object area in square miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-frame-coordinates": { "aliases": [ "mapframe-frame-coord" ], "label": "Mapframe frame coordinates", "description": "Alternate latitude and longitude coordinates for initial placement of map, using Lua error in Module:Coordinates at line 614: attempt to index field 'wikibase' (a nil value).", "example": "12°21′N 56°43′E / 12.35°N 56.71°E", "type": "wiki-template-name" }, "mapframe-switcher": { "label": "Mapframe switcher", "description": "Set to \"auto\" or \"geomasks\" or \"zooms\" to enable Template:Switcher-style switching between multiple mapframes. IF SET TO auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country. IF SET TO geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter. IF SET TO zooms – switch between \"zoomed in\"/\"zoomed midway\"/\"zoomed out\", where \"zoomed in\" is the default zoom (with a minimum of 3), \"zoomed out\" is 1, and \"zoomed midway\" is the average.", "type": "string" }, "mapframe-coordinates": { "aliases": [ "mapframe-coord", "coordinates. coord" ], "label": "Mapframe coordinates ", "description": "Coordinates to use, instead of any on Wikidata. Use the Lua error in Module:Coordinates at line 614: attempt to index field 'wikibase' (a nil value). template.", "example": "12°20′N 56°47′E / 12.34°N 56.78°E", "type": "wiki-template-name", "default": "(coordinates from Wikidata)" } }, "paramOrder": [ "child", "embed", "name", "bridge_name", "aqueduct_name", "native_name", "native_name_lang", "image", "image_size", "image_upright", "alt", "caption", "image_caption", "coordinates", "os_grid_reference", "carries", "crosses", "locale", "location", "official_name", "other_name", "also_known_as", "named_for", "owner", "maint", "maintained", "heritage", "id_type", "id", "website", "preceded", "upstream", "followed", "downstream", "design", "material", "material1", "material2", "length", "width", "height", "depth", "traversable", "passable", "towpath", "mainspan", "number_spans", "spans", "piers_in_water", "pierswater", "load", "clearance_above", "clearance", "clearance_below", "below", "lanes", "life", "num_track", "notrack", "track_gauge", "gauge", "structure_gauge", "electrification", "architect", "designer", "winner", "contracted_designer", "engineering", "builder", "fabricator", "built", "begin", "complete", "cost", "open", "inaugurated", "rebuilt", "collapsed", "destroyed", "closed", "replaces", "replaced_by", "dedicated", "opening", "opened", "traffic", "toll", "qid", "refs", "extra", "references", "mapframe", "mapframe-caption", "mapframe-custom", "mapframe-id", "mapframe-coordinates", "mapframe-wikidata", "mapframe-point", "mapframe-shape", "mapframe-frame-width", "mapframe-frame-height", "mapframe-shape-fill", "mapframe-shape-fill-opacity", "mapframe-stroke-color", "mapframe-stroke-width", "mapframe-marker", "mapframe-marker-color", "mapframe-geomask", "mapframe-geomask-stroke-color", "mapframe-geomask-stroke-width", "mapframe-geomask-fill", "mapframe-geomask-fill-opacity", "mapframe-zoom", "mapframe-length_km", "mapframe-length_mi", "mapframe-area_km2", "mapframe-area_mi2", "mapframe-frame-coordinates", "mapframe-switcher" ] } </templatedata>
|}