International System of Units

"SI" redirects here. For other uses, see SI (disambiguation).

"Kilo" redirects here. For unit of mass, see Kilogram.

Links between the seven SI base unit definitions. Counterclockwise from top: second (time), metre (length), ampere (electric current), kelvin (temperature), candela (luminous intensity), mole (amount of substance) and kilogram (mass).

The International System of Units is the standard modern form of the metric system. The name of this system can be shortened or abbreviated to SI, from the French name Système International d'unités.

The International System of Units is a system of measurement based on 7 base units: the metre (length), kilogram (mass), second (time), ampere (electric current), kelvin (temperature), mole (quantity), and candela (brightness). These base units can be used in combination with each other. This creates SI derived units, which can be used to describe other quantities, such as volume, energy, pressure, and velocity.

The system is used almost globally. Only Myanmar, Liberia, and the United States do not use SI as their official system of measurement. In these countries, though, SI is commonly used in science and medicine.

History and use

The metric system was created in France after the French Revolution in 1789. The original system only had two standard units, the kilogram and the metre. The metric system became popular amongst scientists.

In the 1860s, James Clerk Maxwell and William Thomson (later known as Lord Kelvin) suggested a system with three base units – length, mass, and time. Other units would be derived from those three base units. Later, this suggestion would be used to create the centimetre-gram-second system of units (CGS), which used the centimetre as the base unit for length, the gram as the base unit for mass, and the second as the base unit for time. It also added the dyne as the base unit for force and the erg as the base unit for energy.

As scientists studied electricity and magnetism, they realized other base units were needed to describe these subjects. By the middle of the 20th century, many different versions of the metric system were being used. This was very confusing.

In 1954, the 9th General Conference on Weights and Measures (CGPM) created the first version of the International System of Units. The six base units that they used were the metre, kilogram, second, ampere, Kelvin, and candela. The seventh base unit, the mole, was added in 1971.

SI is now used almost everywhere in the world, except in the United States, Liberia and Myanmar, where the older imperial units are still widely used. Other countries, most of them historically related to the British Empire, are slowly replacing the old imperial system with the metric system or using both systems at the same time.

Base units

The SI base units are measurements used by scientists and other people around the world. All the other units can be written by combining these seven base units in different ways. These other units are called "derived units".

SI base units

Unit name	Unit symbol	Dimension symbol	Quantity name	Definition
second	s	T	time	Prior: [math]\displaystyle{ \frac{1}{86400} }[/math] of a day of 24 hours of 60 minutes of 60 seconds Interim (1956): [math]\displaystyle{ \frac{1}{31556925.9747} }[/math] of the tropical year for 1900 January 0 at 12 hours ephemeris time. Current (1967): The duration of 9192631770 periods of the radiation corresponding to the transition between the two hyperfine levels of the ground state of the caesium-133 atom.
metre	m	L	length	Prior (1793): [math]\displaystyle{ \frac{1}{10000000} }[/math] of the meridian through Paris between the North Pole and the Equator.FG Interim (1960): 1650763.73 wavelengths in a vacuum of the radiation corresponding to the transition between the 2p10 and 5d5 quantum levels of the krypton-86 atom. Current (1983): The distance travelled by light in vacuum in [math]\displaystyle{ \frac{1}{299792458} }[/math] second.
kilogram	kg	M	mass	Prior (1793): The grave was defined as being the mass (then called weight) of one litre of pure water at its freezing point.FG Interim (1889): The mass of a small squat cylinder of ~47 cubic centimetres of platinum-iridium alloy kept in the International Bureau of Weights and Measures, Paris, France. Current (2019): The kilogram is defined by setting the Planck constant h exactly to 6.62607015×10−34 J⋅s (J = kg⋅m2⋅s−2), given the definitions of the metre and the second. Then the formula would be 1 kg = h⁄6.62607015 × 10-34⋅m2⋅s−1
ampere	A	I	electric current	Prior (1881): A tenth of the electromagnetic CGS unit of current. The [CGS] electromagnetic unit of current is that current, flowing in an arc 1 cm long of a circle 1 cm in radius, that creates a field of one oersted at the centre. IEC Interim (1946): The constant current which, if maintained in two straight parallel conductors of infinite length, of negligible circular cross-section, and placed 1 m apart in vacuum, would produce between these conductors a force equal to 2×10−7 newtons per metre of length. Current (2019): The flow of 1⁄1.602176634×10−19 times the elementary charge e per second.
kelvin	K	Θ	thermodynamic temperature	Prior (1743): The centigrade scale is obtained by assigning 0 °C to the freezing point of water and 100 °C to the boiling point of water. Interim (1954): The triple point of water (0.01 °C) defined to be exactly 273.16 K. Previous (1967): [math]\displaystyle{ \frac{1}{273.16} }[/math] of the thermodynamic temperature of the triple point of water. Current (2019): The kelvin is defined by setting the fixed numerical value of the Boltzmann constant k to 1.380649×10−23 J⋅K−1, (J = kg⋅m2⋅s−2), given the definition of the kilogram, the metre and the second.
mole	mol	N	amount of substance	Prior (1900): A stoichiometric quantity which is the equivalent mass in grams of Avogadro's number of molecules of a substance.ICAW Interim (1967): The amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of carbon-12. Current (2019): The amount of substance of exactly 6.02214076×1023 elementary entities. This number is the fixed numerical value of the Avogadro constant, NA, when expressed in the unit mol−1 and is called the Avogadro number.
candela	cd	J	luminous intensity	Prior (1946): The value of the new candle (early name for the candela) is such that the brightness of the full radiator at the temperature of solidification of platinum is 60 new candles per square centimetre. Current (1979): The luminous intensity, in a given direction, of a source that emits monochromatic radiation of frequency 5.4×1014 hertz and that has a radiant intensity in that direction of [math]\displaystyle{ {683} }[/math] watt per steradian. Note: both old and new definitions are approximately the luminous intensity of a whale blubber candle burning modestly bright, in the late 19th century called a "candlepower" or a "candle".
Notes The Prior definitions of the various base units in the above table were made by the following authorities: FG = French Government IEC = International Electrotechnical Commission ICAW = International Committee on Atomic Weights All other definitions result from resolutions by either CGPM or the CIPM and are catalogued in the SI Brochure.

Derived units

Derived units are created by combining the base units. The base units can be divided, multiplied, or raised to powers. Some derived units have special names. Usually these were created to make calculations simpler.

Named units derived from SI base units

Name	Symbol	Quantity	Definition other units	Definition SI base units
radian	rad	plane angle		−
steradian	sr	solid angle		−
hertz	Hz	frequency		s−1
newton	N	force, weight		m⋅kg⋅s−2
pascal	Pa	pressure, stress	N/m2	m−1⋅kg⋅s−2
joule	J	energy, work, heat	N⋅m	m2⋅kg⋅s−2
watt	W	power, radiant flux	J/s	m2⋅kg⋅s−3
coulomb	C	electric charge		s⋅A
volt	V	voltage, electrical potential difference, electromotive force	W/A J/C	m2⋅kg⋅s−3⋅A−1
farad	F	electrical capacitance	C/V	m−2⋅kg−1⋅s4⋅A2
ohm	Ω	electrical resistance, impedance, reactance	V/A	m2⋅kg⋅s−3⋅A−2
siemens	S	electrical conductance	1/Ω	m−2⋅kg−1⋅s3⋅A2
weber	Wb	magnetic flux	J/A	m2⋅kg⋅s−2⋅A−1
tesla	T	magnetic field strength	Wb/m2 V⋅s/m2 N/(A⋅m)	kg⋅s−2⋅A−1
henry	H	inductance	Wb/A V⋅s/A	m2⋅kg⋅s−2⋅A−2
degree Celsius	°C	temperature relative to 273.15 K	TK − 273.15	K
lumen	lm	luminous flux	cd⋅sr	cd
lux	lx	illuminance	lm/m2	m−2⋅cd
becquerel	Bq	radioactivity (decays per unit time)		s−1
gray	Gy	absorbed dose (of ionizing radiation)	J/kg	m2⋅s−2
sievert	Sv	equivalent dose (of ionizing radiation)	J/kg	m2⋅s−2
katal	kat	catalytic activity		s−1⋅mol

Prefixes

Very large or very small measurements can be written using prefixes. Prefixes are added to the beginning of the unit to make a new unit. For example, the prefix kilo- means "1000" times the original unit and the prefix milli- means "0.001" times the original unit. So one kilometre is 1000 metres and one milligram is a 1000th of a gram.

SI prefixes

Prefix Base 1000 Base 10 Decimal English word Adoption Name Symbol Short scale Long scale quetta Q  100010  1030 1000000000000000000000000000000  nonillion  quintillion 2022 ronna R  10009  1027 1000000000000000000000000000  octillion  quadrilliard 2022 yotta Y  10008  1024 1000000000000000000000000  septillion  quadrillion 1991 zetta Z  10007  1021 1000000000000000000000  sextillion  trilliard 1991 exa E  10006  1018 1000000000000000000  quintillion  trillion 1975 peta P  10005  1015 1000000000000000  quadrillion  billiard 1975 tera T  10004  1012 1000000000000  trillion  billion 1960 giga G  10003  109 1000000000  billion  milliard 1960 mega M  10002  106 1000000  million 1873 kilo k  10001  103 1000  thousand 1795 hecto h  10002/3  102 100  hundred 1795 deca da  10001/3  101 10  ten 1795  10000  100 1  one – deci d  1000−1/3  10−1 0.1  tenth 1795 centi c  1000−2/3   10−2 0.01  hundredth 1795 milli m  1000−1  10−3 0.001  thousandth 1795 micro μ  1000−2  10−6 0.000001  millionth 1873 nano n  1000−3  10−9 0.000000001  billionth  milliardth 1960 pico p  1000−4  10−12 0.000000000001  trillionth  billionth 1960 femto f  1000−5  10−15 0.000000000000001  quadrillionth  billiardth 1964 atto a  1000−6  10−18 0.000000000000000001  quintillionth  trillionth 1964 zepto z  1000−7  10−21 0.000000000000000000001  sextillionth  trilliardth 1991 yocto y  1000−8  10−24  0.000000000000000000000001  septillionth  quadrillionth 1991 ronto r  1000−9  10−27  0.000000000000000000000000001  octillionth  quadrilliardth 2022 quecto q  1000−10  10−30  0.000000000000000000000000000001  nonillionth  quintillionth 2022

International System Of UnitsPrefixes Media

• 

  SI base units (outer ring) and constants (inner ring)

• 

  Arrangement of the principal measurements in physics based on the mathematical manipulation of length, time, and mass

• 

  Example of lexical conventions. In the expression of acceleration due to gravity, a space separates the value and the units, both the 'm' and the 's' are lowercase because neither the metre nor the second are named after people, and exponentiation is represented with a superscript '2'.

• 

  Silicon sphere for the Avogadro project used for measuring the Avogadro constant to a relative standard uncertainty of 2×10⁻⁸ or less, held by Achim Leistner

• 

  Countries using the metric (SI), imperial, and US customary systems as of 2019

• 

  Stone marking the Austro-Hungarian/Italian border at Pontebba displaying myriametres, a unit of 10 km used in Central Europe in the 19th century (but since deprecated)

• 

  Closeup of the National Prototype Metre, serial number 27, allocated to the United States

• 

  Reverse dependencies of the SI base units on seven physical constants, which are assigned exact numerical values in the 2019 redefinition. Unlike in the previous definitions, the base units are all derived exclusively from constants of nature. Here, a \rightarrow b means that a is used to define b.

• 

  While not an SI-unit, the litre may be used with SI units. It is equivalent to (10 cm)³ = (1 dm)³ = 10⁻³ m³.